Featured products
Suitable for casting games of bluefin tuna and large yellowfin tuna in the Tsugaru Strait.
Compatible with PE10.
Suitable for bluefin tuna over 100kg.
Recommended for those who are trying to catch bluefin tuna in the Tsugaru Strait for the first time, and for small people. A short length model with less burden.
Suitable for lures used in sardine patterns and large dolphin fish patterns.
With a tone that can withstand long, high-load fights and bat power that can keep putting pressure on the circling bluefin tuna and lifting it firmly.
Spec
Length: 7ft2inch (2m19cm)
Weight: 391g (#1: 163g #2 grip: 228g)
Pe: 8 - 10
Lure: 60 - 250g
Guide: PMNST16-PMNSG40
Two types with different power (No1 / No2 (No1 has been strengthened overall)) were produced from the first prototype, and actual fishing began.
Regarding the guide settings, with the cooperation of the people involved, we repeatedly cast various lures in the Tokara Islands, bluefin tuna in the Tsugaru Strait, overseas fields, etc., and after making only small changes, we were able to come up with a satisfactory setting
. The guide settings were designed to take advantage of both the PE10 and the large-diameter spool to reduce line thrashing, and the guide settings to make the most of the lift power.
Initially, we were using a concept of line compatible with 12, but after repeatedly fighting sharks and GTs with a live horse mackerel, we realized that the power balance of PE12 was a little light for both blanks.
However, the casting performance of various lures, the bending, strength, and lightness of the blank that continues to put pressure on the target with the least burden on the angler, and the overall balance, it was a model with the high level of completion that we were looking for.
After fighting with various fish, we were convinced that the PE10 tension is suitable for this 72 length and this tone.
We tested this 72 model with PE10.
During a fishing trip to Yonaguni in January 2020, we caught two marlin with No1 and one with No2.
Although there are some differences from fighting with bluefin tuna, it was an excellent test subject for checking the blank condition, such as the load on the angler and lift power. The thorough differences between No1 and No2 were also revealed.
(See the video link below.)
Including these points, we have reaffirmed that No2 has a good balance in various ways with PE10, and have decided to proceed with it as a release model.
The WhiteInsight 7210 is a model that targets bluefin tuna and large yellowfin tuna, and the fighting time can last several hours. Moreover, it is a model that can handle PE10 high drag, so the angler needs to conserve his physical strength, and the fighting style is different from other models. The OceanSprinter 8110
, which is in the same PE class, feels like you are lowering your hips and lifting up by bending and stretching your legs without standing the rod too high. If you have strength and weight, you can use the lifting power of the rod with just your arms. The position of the waist belt where you insert the rod end is located just above the crotch. However, the fight time is limited to around 15 minutes. (This model is suitable for GT and yellowtail that will win in one go.)
On the other hand, the biggest advantage of the WhiteInsight7210 is that it reduces the consumption of arm strength, back strength, and grip strength by bending the rod upright and placing the fulcrum in front of you, and releasing the load on the rod to the rod end. (See the first to eighth images below. Or watch the YouTube video of Yonaguni.)
When the rod is upright, the load is concentrated on the rod end, and the load is placed on the waist belt through the rod belt. For this reason, a rod belt that hangs from the waist belt (a Souls product was used during testing) is necessary. This leads
to a decrease in back strength and leg strength, so hold the rod lightly without lowering your waist more than necessary. If your grip strength decreases, you should hold the rod with your elbow, or remove the rod end from the belt and take a break with your armpits bent.
It's a long, fierce fight that you don't know when it will end, so it's best to approach it as if you were running a long distance. (This is a fighting style that is also suitable for WhiteInsight8010.)
(GT and yellowtail are short-distance races that decide the outcome in one go. OceanSprinter838/8110/711RS/7510NL)
Note: Although the rod is made of carbon material that is stronger than the OceanSprinter series in terms of breaking strength, the rod can still be damaged if handled incorrectly. In particular, if the tuna turns widely and goes under the boat, which is likely to happen just before landing, do not keep the rod upright, but remove the rod end from the belt and change the side to deal with it.
Regarding the gimbal belt:
In the test, we used one made by Souls.
We also use TT BELT from MC Works. In that case, we change it to a hanging type from the waist in combination with SANSUI's original Super Urethane Back Saver Belt SW (waist belt).
In any case, please use a strong and reliable gimbal belt that is large enough to cover both legs.
The PE12 compatible model is being developed with a shorter length, and has already moved from Proto No. 1 to No. 2 (April 2021).
Actual fishing tests have been conducted since spring 2020. Released as WhiteInsight 61112 (2022).
In addition, we have developed and released the WhiteInsight 7610, which has improved the long-distance casting ability required for luring PE10 compatible fish and has an additional 20% increase in power, making it recommended for anglers who are used to fighting. (July 2021)
Recommended usage for tuna by size
Up to 30kg OceanSprinter844 / 856 WhiteInsight828
Up to 50kg OceanSprinter856 / 838 / 8110 WhiteInsight828 / 8010
50kg and up WhiteInsight828 / 8010 / 7210
100kg and up WhiteInsight7210 / 7610/ 61112
(WI828 is not stronger than OS838, but is a guideline based on the balance between longer fight time and drag tension)
About Tsugaru Strait compatible models
WhiteInsight7210 For those tuna fishing in the strait for the first time, small anglers, small boats
WhiteInsight7610 For anglers who are used to fighting, also suitable for size 12 (in this case, be careful not to tie directly below and use straight fights frequently)
WhiteInsight61112 It is possible to take on a higher load than the 7610 and has a higher breaking strength, but because it is a one-piece structure, the lift power is inferior to the 7610, but the physical burden is less.
*The 7210/7610 can also handle size 12, but when it is directly below or goes under the boat, you should use side grips to fight straight. Of course, when the 61112 goes under the boat, you should also use side grips. We have also tried
and tested the 7210 and bait casting models and have rod setting data.
As shown in the image below, we have caught several small-class tuna, GT and yellowtail, but the line capacity and drag performance of the bait reel used in the test cannot be said to be able to handle bluefin tuna over 100 kg. We will need to choose a new reel, which will be a challenge for the future.
*When it comes to GT casting and yellowtail casting, there are some effective points such as casting and operating large lures and high drag pressure with a short rod.
We would like to express our sincere gratitude to everyone who cooperated with the test development.
*The 4th, 5th, 6th, 7th and 8th images below are the No.1 blank (a little lighter).
The rest are the release model No.2 blanks.
(I also use this 7210 for GT casting. It is easy to cast and operate large lures, and when you hit it, you can apply high pressure and catch it easily. Since it is a tuna rod, please think of it as one way of using it.)
Challenging large GTs hidden in shallow, torrent areas
A short length setting that makes it easier for anglers to apply high loads and even endure the intense follow from boats on unstable decks.
Rod power that anglers of average physique (physical strength) can master with effort.
· Length: 7ft5inch
· Closed Length: 155.5㎝
· Weight: 395g ( #1 : 173g #2 : 222g )
· Tip Dia.: 3.6mm
· Butt Dia: 12.0mm
· Pe: Pe8-10
· Lure: 100-250g
· Pieces: 2
· Guide: All stainless, PMNST16 / PMNSG16 / PMNSG20 / PMNSG25 / PMNSG30 / PMNSG40
Made in Japan
Suitable for casting games of bluefin tuna and large yellowfin tuna in the Tsugaru Strait.
Compatible with PE10.
Suitable for bluefin tuna over 100kg.
Recommended for those who are trying to catch bluefin tuna in the Tsugaru Strait for the first time, and for small people. A short length model with less burden.
Suitable for lures used in sardine patterns and large dolphin fish patterns.
With a tone that can withstand long, high-load fights and bat power that can keep putting pressure on the circling bluefin tuna and lifting it firmly.
Spec
Length: 7ft2inch (2m19cm)
Weight: 391g (#1: 163g #2 grip: 228g)
Pe: 8 - 10
Lure: 60 - 250g
Guide: PMNST16-PMNSG40
Two types with different power (No1 / No2 (No1 has been strengthened overall)) were produced from the first prototype, and actual fishing began.
Regarding the guide settings, with the cooperation of the people involved, we repeatedly cast various lures in the Tokara Islands, bluefin tuna in the Tsugaru Strait, overseas fields, etc., and after making only small changes, we were able to come up with a satisfactory setting
. The guide settings were designed to take advantage of both the PE10 and the large-diameter spool to reduce line thrashing, and the guide settings to make the most of the lift power.
Initially, we were using a concept of line compatible with 12, but after repeatedly fighting sharks and GTs with a live horse mackerel, we realized that the power balance of PE12 was a little light for both blanks.
However, the casting performance of various lures, the bending, strength, and lightness of the blank that continues to put pressure on the target with the least burden on the angler, and the overall balance, it was a model with the high level of completion that we were looking for.
After fighting with various fish, we were convinced that the PE10 tension is suitable for this 72 length and this tone.
We tested this 72 model with PE10.
During a fishing trip to Yonaguni in January 2020, we caught two marlin with No1 and one with No2.
Although there are some differences from fighting with bluefin tuna, it was an excellent test subject for checking the blank condition, such as the load on the angler and lift power. The thorough differences between No1 and No2 were also revealed.
(See the video link below.)
Including these points, we have reaffirmed that No2 has a good balance in various ways with PE10, and have decided to proceed with it as a release model.
Regarding the fighting style
The WhiteInsight 7210 is a model that targets bluefin tuna and large yellowfin tuna, and the fighting time can last several hours. Moreover, it is a model that can handle PE10 high drag, so the angler needs to conserve his physical strength, and the fighting style is different from other models. The OceanSprinter 8110
, which is in the same PE class, feels like you are lowering your hips and lifting up by bending and stretching your legs without standing the rod too high. If you have strength and weight, you can use the lifting power of the rod with just your arms. The position of the waist belt where you insert the rod end is located just above the crotch. However, the fight time is limited to around 15 minutes. (This model is suitable for GT and yellowtail that will win in one go.)
On the other hand, the biggest advantage of the WhiteInsight7210 is that it reduces the consumption of arm strength, back strength, and grip strength by bending the rod upright and placing the fulcrum in front of you, and releasing the load on the rod to the rod end. (See the first to eighth images below. Or watch the YouTube video of Yonaguni.)
When the rod is upright, the load is concentrated on the rod end, and the load is placed on the waist belt through the rod belt. For this reason, a rod belt that hangs from the waist belt (a Souls product was used during testing) is necessary. This leads
to a decrease in back strength and leg strength, so hold the rod lightly without lowering your waist more than necessary. If your grip strength decreases, you should hold the rod with your elbow, or remove the rod end from the belt and take a break with your armpits bent.
It's a long, fierce fight that you don't know when it will end, so it's best to approach it as if you were running a long distance. (This is a fighting style that is also suitable for WhiteInsight8010.)
(GT and yellowtail are short-distance races that decide the outcome in one go. OceanSprinter838/8110/711RS/7510NL)
Note: Although the rod is made of carbon material that is stronger than the OceanSprinter series in terms of breaking strength, the rod can still be damaged if handled incorrectly. In particular, if the tuna turns widely and goes under the boat, which is likely to happen just before landing, do not keep the rod upright, but remove the rod end from the belt and change the side to deal with it.
Regarding the gimbal belt:
In the test, we used one made by Souls.
We also use TT BELT from MC Works. In that case, we change it to a hanging type from the waist in combination with SANSUI's original Super Urethane Back Saver Belt SW (waist belt).
In any case, please use a strong and reliable gimbal belt that is large enough to cover both legs.
The PE12 compatible model is being developed with a shorter length, and has already moved from Proto No. 1 to No. 2 (April 2021).
Actual fishing tests have been conducted since spring 2020. Released as WhiteInsight 61112 (2022).
In addition, we have developed and released the WhiteInsight 7610, which has improved the long-distance casting ability required for luring PE10 compatible fish and has an additional 20% increase in power, making it recommended for anglers who are used to fighting. (July 2021)
Recommended usage for tuna by size
Up to 30kg OceanSprinter844 / 856 WhiteInsight828
Up to 50kg OceanSprinter856 / 838 / 8110 WhiteInsight828 / 8010
50kg and up WhiteInsight828 / 8010 / 7210
100kg and up WhiteInsight7210 / 7610/ 61112
(WI828 is not stronger than OS838, but is a guideline based on the balance between longer fight time and drag tension)
About Tsugaru Strait compatible models
WhiteInsight7210 For those tuna fishing in the strait for the first time, small anglers, small boats
WhiteInsight7610 For anglers who are used to fighting, also suitable for size 12 (in this case, be careful not to tie directly below and use straight fights frequently)
WhiteInsight61112 It is possible to take on a higher load than the 7610 and has a higher breaking strength, but because it is a one-piece structure, the lift power is inferior to the 7610, but the physical burden is less.
*The 7210/7610 can also handle size 12, but when it is directly below or goes under the boat, you should use side grips to fight straight. Of course, when the 61112 goes under the boat, you should also use side grips. We have also tried
and tested the 7210 and bait casting models and have rod setting data.
As shown in the image below, we have caught several small-class tuna, GT and yellowtail, but the line capacity and drag performance of the bait reel used in the test cannot be said to be able to handle bluefin tuna over 100 kg. We will need to choose a new reel, which will be a challenge for the future.
*When it comes to GT casting and yellowtail casting, there are some effective points such as casting and operating large lures and high drag pressure with a short rod.
We would like to express our sincere gratitude to everyone who cooperated with the test development.
*The 4th, 5th, 6th, 7th and 8th images below are the No.1 blank (a little lighter).
The rest are the release model No.2 blanks.
(I also use this 7210 for GT casting. It is easy to cast and operate large lures, and when you hit it, you can apply high pressure and catch it easily. Since it is a tuna rod, please think of it as one way of using it.)
The rear grip is set to be about 20mm longer than the Ocean Sprinter 838/8110, and it is also compatible with style belts that specialize in long-term fights with tuna. It is about 505mm from the reel foot center to the end.
Recommended size Yellowfin tuna-100 kg
(It does not support places with fast tides such as Tappi Aomori and 100 kg class bluefin tuna. We will develop a dedicated model in the future.)
Yellowfin tuna compatible models (reference)
~ 30 km OceanSprinter844 / 856 WhiteInsight828
~ 50 km OceanSprinter856 / 838/8110 WhiteInsight828 / 8010
50 kg ~ WhiteInsight828 / 8010/7210
(It does not mean that WI828 is stronger than OS838, but it is a guideline based on the balance between longer fight time and drag tension)
· Length: 8ft2inch
· Weight: 378g
· Tip Dia. / Butt Dia. : 2.8mm / 16mm
· Pe: 6-8
· Lure: 30~200g
· Pieces: Grip Joint
· Guide: All Stainless PMNST16 / PMNSG16×2 / PMNSG20 / PMNSG25 / PMNSG30 / PMNSG40
· Sheet: DPS20LD UP
· Grip: EVA
· Compatible Reel: Shimano 14000, 18000 & Daiwa 5500, 6000, 7500
Made In Japan
WhiteInsight 7610 is a model targeting bluefin tuna and large yellowfin tuna, and the when the fight time can be several hours. A model that also supports PE10 with high drag settings, and when it's necessary to preserve the physical strength of the angler.
The biggest advantage is that the rod is bent and the fulcrum is in front, and the load applied to the rod is released to the rod end, which gives strength. It is to reduce the consumption of back muscle strength and grip strength.
The power of the current "White Insight 7210" has been increased by about 120%.
Lift speed and power that can be recommended for fighting in tight fast flowing currents and for anglers who are accustomed to long fights.
The length has also been extended by 4 inches to improve long-distance casting.
The tip feeling is not a hard feeling, but a soft tip feeling similar to "7210".
Since it absorbs the movement of fish when running well, it can easily handle large Kingfish and Tuna when diving deep.
Works a versatile lure range from small to large lures up to 250g.
The grips are designed with slender hard EVA.
Guide: All stainless All stainless steel PMNST16 / PMNSG16 / PMNSG20 / PMNSG25 / PMNSG30 / PMNSG40
TUNA model, so long-time fighting is expected.
A stainless steel guide is used to withstand the continuous load and impact.
The 7610, which is expected to fight for a longer time with a higher load, is processed so that the thread coating adheres more closely to the guide foot.
All guides are underwrapped.
In order to improve the cast feeling, the under wrapping is wrapped as narrowly as possible.
Recommended Reels: Daiwa Saltiga 18000H/20000H/6500H/7000H/8000H or Stella 18000H/20000H
Length: 7'6 "
Line PE #: 8 - 10
Cast: 60g ~ 250g
Recommended Drag : 18kg
Made in Japan
It is both "light" to cast and operate and "tenacity" after hooking.
It is extremely easy to use for casting to yellowfin tuna up to 40kg class and casting to kingfish using PE5/6. It is the sharpest model in the series and is the one that the development staff uses most frequently for casting to kingfish and yellowfin tuna.
The common development concept for the OceanSprinter series is that the ease of catching fish and the inherent lifting power of the rod are the most important.
An encounter with a large fish can come suddenly.
A powerful run that cannot be stopped even under high load.
In order to catch such a large fish, we believe that "tenacity" and a "straightforward bend curve" are necessary. This is especially true in stormy or shallow areas with strong currents. The rod is designed to draw a straight bend curve as the load increases, so that the tension on the fish does not change suddenly. This reduces the load fluctuation for the angler, allowing the angler to continue applying stable pressure to the fish from start to finish. Furthermore, by achieving these, we have achieved excellent casting performance, and it has become possible to reduce the burden on the body from small to large lures.
Recommended reel: STELLA 14000XG / SALTIGA5500
Recommended line: PE5-6 (suitable drag load ~11kg)
Recommended lure: 30g-130g (up to 100g can be cast firmly. For lures close to 130g,
cast it by placing it on the rod for easier and more comfortable casting)
Tested for casting yellowfin tuna in the Goto Islands, Nagasaki and northern Kyushu, and for luring yellowfin tuna off the coast of Mie Prefecture.
This model can handle everything from sardine patterns to dolphin fish patterns.
Compared to the 838/8110 and models, it puts less strain on the body, so it has a sharper feeling while still having some tenacity, so you can cast more easily through the wind even for long periods of time or against the wind. (up to 100g)
This model is also very useful for luring yellowfin tuna up to 40kg.
*Regarding the fighting position
We do not recommend using the gimbal belt in a low position.
This model does not require the use of a gimbal belt when the fight is decided in a short time of about 10 minutes using PE6. (Please use it when you need to fight for a long time, such as with tuna over 40 kg.)
When fighting, do not stand too upright, but maintain an angle that puts load on the butt part, and you can draw out the lift power of the blank.
Laying it down puts more strain on the body, but also increases the pressure on the fish. There are various factors such as the fight time and the size of the fish, so please respond according to the situation.
(There is a possibility that the fish will come off when fixing the rod end to the gimbal belt. Also, fixing the rod end may slow down the response to sudden movements of the fish.)